What kind of LED advertising screen power supply will be higher(3)

The core problem of the Marine boost/buck voltage power supply is the IC, which is like the brain of the Marine boost/buck voltage power supply. The quality of the IC can directly affect the various working parameters of the Marine boost/buck voltage power supply.

Three: Transformer components

Determine power, temperature and transformer. The transformer is responsible for the AC-DC Marine boost/buck voltage power supply, and the energy overload will saturate.

Regulation of output voltage
For module power products with TRIM or ADJ (adjustable) output pins, the output voltage can be adjusted within a certain range through resistors or potentiometers, and the general adjustment range is ±10%.
For the TRIM output pin, connect the center of the potentiometer to TRIM. In all modules with +S and -S pins, the other two ends are connected to +S and -S respectively. When there is no +S, -S, connect the two ends to the output positive and negative poles of the corresponding main circuit (+S to +Vin, -S to -Vin), and then adjust the potentiometer. The resistance value of the potentiometer is generally more appropriate to use 5 ~ 10kΩ.

LED advertising screen Marine boost/buck voltage power supplyFour: Electrolytic and ceramic capacitors

Electrolytic capacitors, aluminum electrolytic capacitors and monolithic gallbladders, which use sulfuric acid to make the insulating medium, large capacity can carry out smaller volumes for the above, and are marked with a + sign, some are marked with a mark, generally do low cross-linking and side-by-side Circuit filter with larger loss meson, integral aluminum electrolytic capacitor, due to the shortcomings of using special materials, the electrolytic performance is better than ordinary, the preferred frequency, but can not do too much capacity, it can be used to accurately circuits, such as oscillators, or timing circuits.