What kind of Marine boost power supply will be higher(3)

Remote control switch circuit
The remote control switch operation of the module power supply is carried out through the REM terminal. There are two general control methods:
(1) REM is connected to -VIN (reference ground), the remote control is turned off, and VREF<0.4V is required. REM is suspended or connected to +VIN, the module works, and VREM>1V is required.
(2) REM is connected to VIN, the remote control is turned off, and VREM<0.4V is required. REM is connected to +VIN, the module works, VREM>1V is required. REM is suspended, and the remote control is turned off, that is, the so-called "suspended shutdown" (-R).
If the control is to be isolated from the input, an optocoupler can be used to pass the control signal

The core problem of the Marine boost voltage power supply is the IC, which is like the brain of the Marine boost voltage power supply. The quality of the IC can directly affect the various working parameters of the Marine boost voltage power supply.

Three: Transformer components

Determine power, temperature and transformer. The transformer is responsible for the AC-DC Marine boost voltage power supply, and the energy overload will saturate.

Marine boost Marine boost voltage power supplyFour: Electrolytic and ceramic capacitors

Electrolytic capacitors, aluminum electrolytic capacitors and monolithic gallbladders, which use sulfuric acid to make the insulating medium, large capacity can carry out smaller volumes for the above, and are marked with a + sign, some are marked with a mark, generally do low cross-linking and side-by-side Circuit filter with larger loss meson, integral aluminum electrolytic capacitor, due to the shortcomings of using special materials, the electrolytic performance is better than ordinary, the preferred frequency, but can not do too much capacity, it can be used to accurately circuits, such as oscillators, or timing circuits.